Description: 3" x 4" photograph of an Ohio electrical map from a collection of models for the Ohio State School for the Blind. The map is constructed of one-quarter inch plywood. Grooved boundaries in the wood can be easily traced by a finger. County names are listed on the each side of map in braille. County seats are marked by a Mallory jack inserted in the plywood and wired to an electric buzzer. The Ohio map has 88 counties and county seats. Making a correct connection between the county and its county seat will result in a loud buzzer sound. For instance, placing of the plugs in the Columbus and Franklin county jacks will respond in a loud buzzer. No response is obtained if placed in the wrong jack. There was a similar electrical map of the United States. The model is width 59.5", height 49". Photographs and descriptions of models were included in the book "Models for the Blind," compiled by workers of the Ohio Writers' Program. The book was meant as a guide, to be used in the building and study of models, and as documentation of the achievements at the Ohio State School for the Blind. The models were a result of research, design and construction by employees of the Works Projects Administration. Models were made of durable materials to withstand regular usage. The average cost of labor for larger models was $45. A special room was built to store the models where teachers could borrow them to be used in classroom instruction. In 1837, the Ohio government established the Ohio Institution for the Education of the Blind. This institution was the predecessor of the Ohio State School for the Blind. It was the first public school for the blind in the United States. It was the first in the nation to be created and maintained entirely by the State government. The school opened its doors in 1839, and it was located in downtown Columbus, Ohio. Any blind children residing in Ohio could attend the institution. Eleven students enrolled at the Ohio Institution for the Education of the Blind this first year. The school initially had a maximum capacity of sixty students, but upon moving to a new building in 1874, more than three hundred students could attend at one time. Between 1839 and 1901, 2,058 students enrolled at the Ohio Institution for the Education of the Blind, with 339 attending in 1901 alone. In the early 1900s, the Ohio Institution for the Education of the Blind became known as the Ohio State School for the Blind, and the Ohio Department of Education assumed control of the school. In 1953, the school moved ten miles north of its original location to its present home. In 2005, 126 students enrolled in the Ohio State School for the Blind. Students as young as three and as old as twenty-one years of age attended the school. Students could receive their entire education (kindergarten through high school) at the institution. In addition, the Ohio State School for the Blind offered vocational training for its students. View on Ohio Memory.
Image ID: SA1039AV_B11F02_012_001
Subjects: United States. Work Projects Administration; Blind--Education--Ohio; Ohio State School for the Blind; Maps
Places: Columbus (Ohio); Franklin County (Ohio)
 

Description: Reverse reads: 22265. Photo by Wilson. Ohio, Columbus. Photo shows blind students getting this story of the Nativity from their fingertips on a model which was made by EPA workers for the students at the Ohio State School for the Blind. The Ohio Institution for the Education of the Blind was established in 1837. In the 1900s the name was changed to the Ohio State School for the Blind. The Ohio Department of Education took control of the school at this time. In 1953, the school moved from its location on Main Street, Columbus to 5220 North High Street in Columbus. View on Ohio Memory.
Image ID: SA1039AV_B11F04_24_001
Subjects: Ohio State School for the Blind; Students; Education--Ohio; School--Ohio; Blind--Education--Ohio--Columbus; Ohio--History--Pictorial works; Federal Writers' Project
Places: Columbus (Ohio); Franklin County (Ohio)
 

Description: 3"x 4" photograph of a steel truss bridge from a collection of models for the Ohio State School for the Blind. The model is a replica of a highway bridge over the Wabash river in Mercer County, Ohio. The model is length 59.5", width 15", height 13.5". Photographs and descriptions of models were included in the book "Models for the Blind," compiled by workers of the Ohio Writers' Program. The book was meant as a guide, to be used in the building and study of models, and as documentation of the achievements at the Ohio State School for the Blind. The models were a result of research, design and construction by employees of the Works Projects Administration. Models were made of durable materials to withstand regular usage. The average cost of labor for larger models was $45. A special room was built to store the models where teachers could borrow them to be used in classroom instruction. In 1837, the Ohio government established the Ohio Institution for the Education of the Blind. This institution was the predecessor of the Ohio State School for the Blind. It was the first public school for the blind in the United States. It was the first in the nation to be created and maintained entirely by the State government. The school opened its doors in 1839, and it was located in downtown Columbus, Ohio. Any blind children residing in Ohio could attend the institution. Eleven students enrolled at the Ohio Institution for the Education of the Blind this first year. The school initially had a maximum capacity of sixty students, but upon moving to a new building in 1874, more than three hundred students could attend at one time. Between 1839 and 1901, 2,058 students enrolled at the Ohio Institution for the Education of the Blind, with 339 attending in 1901 alone. In the early 1900s, the Ohio Institution for the Education of the Blind became known as the Ohio State School for the Blind, and the Ohio Department of Education assumed control of the school. In 1953, the school moved ten miles north of its original location to its present home. In 2005, 126 students enrolled in the Ohio State School for the Blind. Students as young as three and as old as twenty-one years of age attended the school. Students could receive their entire education (kindergarten through high school) at the institution. In addition, the Ohio State School for the Blind offered vocational training for its students. View on Ohio Memory.
Image ID: SA1039AV_B11F02_019_001
Subjects: United States. Work Projects Administration; Blind--Education--Ohio; Ohio State School for the Blind; Truss Bridges Ohio
Places: Columbus (Ohio); Franklin County (Ohio)
 

Description: 7" x 4.5" photograph of a steel truss bridge from a collection of models for the Ohio State School for the Blind. The model is a replica of a highway bridge over the Wabash river in Mercer County, Ohio. The model is length 59.5", width 15", height 13.5". Photographs and descriptions of models were included in the book "Models for the Blind," compiled by workers of the Ohio Writers' Program. The book was meant as a guide, to be used in the building and study of models, and as documentation of the achievements at the Ohio State School for the Blind. The models were a result of research, design and construction by employees of the Works Projects Administration. Models were made of durable materials to withstand regular usage. The average cost of labor for larger models was $45. A special room was built to store the models where teachers could borrow them to be used in classroom instruction. In 1837, the Ohio government established the Ohio Institution for the Education of the Blind. This institution was the predecessor of the Ohio State School for the Blind. It was the first public school for the blind in the United States. It was the first in the nation to be created and maintained entirely by the State government. The school opened its doors in 1839, and it was located in downtown Columbus, Ohio. Any blind children residing in Ohio could attend the institution. Eleven students enrolled at the Ohio Institution for the Education of the Blind this first year. The school initially had a maximum capacity of sixty students, but upon moving to a new building in 1874, more than three hundred students could attend at one time. Between 1839 and 1901, 2,058 students enrolled at the Ohio Institution for the Education of the Blind, with 339 attending in 1901 alone. In the early 1900s, the Ohio Institution for the Education of the Blind became known as the Ohio State School for the Blind, and the Ohio Department of Education assumed control of the school. In 1953, the school moved ten miles north of its original location to its present home. In 2005, 126 students enrolled in the Ohio State School for the Blind. Students as young as three and as old as twenty-one years of age attended the school. Students could receive their entire education (kindergarten through high school) at the institution. In addition, the Ohio State School for the Blind offered vocational training for its students. View on Ohio Memory.
Image ID: SA1039AV_B11F02_057_001
Subjects: United States. Work Projects Administration; Blind--Education--Ohio; Ohio State School for the Blind; Truss Bridges Ohio
Places: Columbus (Ohio); Franklin County (Ohio)
 

Description: 3" x 4" photograph of a bolted house from a collection of models for the Ohio State School for the Blind. The bolted house model was designed to improve and demonstrate manual dexterity and coordination. A replication of most likely the most simple of the small, two-story gable houses. The model was small enough for a child to manipulate the parts; walls, roof, floor and chimney. The parts were made to fasten to one another by different-sized bolts and nuts. Each part had to be fastened in a particular order with the corresponding part. The chimney could only be fastened to the roof with the correct-sized bolt, and only after the roof was bolted in place. Likewise, the walls had to be bolted before the roof was bolted, and previously be bolted to the floor pieces. Two bolted house models were made. One had light gray walls and a green roof; the other had white walls and a blue roof. Both had a red chimney. All parts were made of wood. The model dimensions: length 18", width 7", height 12". Photographs and descriptions of models were included in the book "Models for the Blind, " compiled by workers of the Ohio Writers' Program. The book was meant as a guide, to be used in the building and study of models, and as documentation of the achievements at the Ohio State School for the Blind. The models were a result of research, design and construction by employees of the Works Projects Administration. Models were made of durable materials to withstand regular usage. The average cost of labor for larger models was $45. A special room was built to store the models where teachers could borrow them to be used in classroom instruction. In 1837, the Ohio government established the Ohio Institution for the Education of the Blind. This institution was the predecessor of the Ohio State School for the Blind. It was the first public school for the blind in the United States. It was the first in the nation to be created and maintained entirely by the State government. The school opened its doors in 1839, and it was located in downtown Columbus, Ohio. Any blind children residing in Ohio could attend the institution. Eleven students enrolled at the Ohio Institution for the Education of the Blind this first year. The school initially had a maximum capacity of sixty students, but upon moving to a new building in 1874, more than three hundred students could attend at one time. Between 1839 and 1901, 2, 058 students enrolled at the Ohio Institution for the Education of the Blind, with 339 attending in 1901 alone. In the early 1900s, the Ohio Institution for the Education of the Blind became known as the Ohio State School for the Blind, and the Ohio Department of Education assumed control of the school. In 1953, the school moved ten miles north of its original location to its present home. In 2005, 126 students enrolled in the Ohio State School for the Blind. Students as young as three and as old as twenty-one years of age attended the school. Students could receive their entire education (kindergarten through high school) at the institution. In addition, the Ohio State School for the Blind offered vocational training for its students. View on Ohio Memory.
Image ID: SA1039AV_B11F02_036_001
Subjects: United States. Work Projects Administration; Blind--Education--Ohio; Ohio State School for the Blind; Model Architecture, Domestic--Ohio--Pictorial works.
Places: Columbus (Ohio); Franklin County (Ohio)
 

Description: 3" x 4" photograph of a bolted house from a collection of models for the Ohio State School for the Blind. The bolted house model was designed to improve and demonstrate manual dexterity and coordination. A replication of most likely the most simple of the small, two-story gable houses. The model was small enough for a child to manipulate the parts; walls, roof, floor and chimney. The parts were made to fasten to one another by different-sized bolts and nuts. Each part had to be fastened in a particular order with the corresponding part. The chimney could only be fastened to the roof with the correct-sized bolt, and only after the roof was bolted in place. Likewise, the walls had to be bolted before the roof was bolted, and previously be bolted to the floor pieces. Two bolted house models were made. One had light gray walls and a green roof; the other had white walls and a blue roof. Both had a red chimney. All parts were made of wood. The model dimensions: length 18", width 7", height 12". Photographs and descriptions of models were included in the book "Models for the Blind," compiled by workers of the Ohio Writers' Program. The book was meant as a guide, to be used in the building and study of models, and as documentation of the achievements at the Ohio State School for the Blind. The models were a result of research, design and construction by employees of the Works Projects Administration. Models were made of durable materials to withstand regular usage. The average cost of labor for larger models was $45. A special room was built to store the models where teachers could borrow them to be used in classroom instruction. In 1837, the Ohio government established the Ohio Institution for the Education of the Blind. This institution was the predecessor of the Ohio State School for the Blind. It was the first public school for the blind in the United States. It was the first in the nation to be created and maintained entirely by the State government. The school opened its doors in 1839, and it was located in downtown Columbus, Ohio. Any blind children residing in Ohio could attend the institution. Eleven students enrolled at the Ohio Institution for the Education of the Blind this first year. The school initially had a maximum capacity of sixty students, but upon moving to a new building in 1874, more than three hundred students could attend at one time. Between 1839 and 1901, 2,058 students enrolled at the Ohio Institution for the Education of the Blind, with 339 attending in 1901 alone. In the early 1900s, the Ohio Institution for the Education of the Blind became known as the Ohio State School for the Blind, and the Ohio Department of Education assumed control of the school. In 1953, the school moved ten miles north of its original location to its present home. In 2005, 126 students enrolled in the Ohio State School for the Blind. Students as young as three and as old as twenty-one years of age attended the school. Students could receive their entire education (kindergarten through high school) at the institution. In addition, the Ohio State School for the Blind offered vocational training for its students. View on Ohio Memory.
Image ID: SA1039AV_B11F02_038_001
Subjects: United States. Work Projects Administration; Blind--Education--Ohio; Ohio State School for the Blind; Model Architecture, Domestic--Ohio--Pictorial works.
Places: Columbus (Ohio); Franklin County (Ohio)
 

Description: 3" x 4" photograph of Monticello replica from a collection of models for the Ohio State School for the Blind. The home of Thomas Jefferson, third President of the United States, stands on top of a "little mountain," 600 feet high. Jefferson designed Monticello, meaning "hillock" or "little mountain" in Italian, that took more than 40 years to build. Monticello is an example of neoclassical design; a fine example of Roman neoclassicism. The first design rendered 14 rooms total on three floors; now 33 rooms on four floors. The site of Monticello, located on a large plantation of 5,000 acres, had been in the family since 1735. The Virginia State Capitol and the University of Virginia were also designed by Thomas Jefferson. The model is length 36", width 41", height 16.5". Photographs and descriptions of models were included in the book "Models for the Blind," compiled by workers of the Ohio Writers' Program. The book was meant as a guide, to be used in the building and study of models, and as documentation of the achievements at the Ohio State School for the Blind. The models were a result of research, design and construction by employees of the Works Projects Administration. Models were made of durable materials to withstand regular usage. The average cost of labor for larger models was $45. A special room was built to store the models where teachers could borrow them to be used in classroom instruction. In 1837, the Ohio government established the Ohio Institution for the Education of the Blind. This institution was the predecessor of the Ohio State School for the Blind. It was the first public school for the blind in the United States. It was the first in the nation to be created and maintained entirely by the State government. The school opened its doors in 1839, and it was located in downtown Columbus, Ohio. Any blind children residing in Ohio could attend the institution. Eleven students enrolled at the Ohio Institution for the Education of the Blind this first year. The school initially had a maximum capacity of sixty students, but upon moving to a new building in 1874, more than three hundred students could attend at one time. Between 1839 and 1901, 2,058 students enrolled at the Ohio Institution for the Education of the Blind, with 339 attending in 1901 alone. In the early 1900s, the Ohio Institution for the Education of the Blind became known as the Ohio State School for the Blind, and the Ohio Department of Education assumed control of the school. In 1953, the school moved ten miles north of its original location to its present home. In 2005, 126 students enrolled in the Ohio State School for the Blind. Students as young as three and as old as twenty-one years of age attended the school. Students could receive their entire education (kindergarten through high school) at the institution. In addition, the Ohio State School for the Blind offered vocational training for its students. View on Ohio Memory.
Image ID: SA1039AV_B11F02_043_001
Subjects: United States. Work Projects Administration; Blind--Education--Ohio; Ohio State School for the Blind; Monticello (Va.)
Places: Columbus (Ohio); Franklin County (Ohio)
 

Description: 3" x 4" photograph of bolted blocks from the collection of models for the Ohio State School for the Blind. The sets of square wooden blocks and steel bolts consisted of three blocks of equal size and their corresponding size of bolt. Bolts fit into holes in the center of the blocks. The blocks and bolts were stored in small boxes made of plywood when not in use. The objective was to find the set of three blocks of the same size with the same sized hole, and then bolt them together with a bolt of the correct size. The block sets helped manual dexterity and coordination. Photographs and descriptions of models were included in the book "Models for the Blind," compiled by workers of the Ohio Writers' Program. The book was meant as a guide, to be used in the building and study of models, and as documentation of the achievements at the Ohio State School for the Blind. The models were a result of research, design and construction by employees of the Works Projects Administration. Models were made of durable materials to withstand regular usage. The average cost of labor for larger models was $45. A special room was built to store the models where teachers could borrow them to be used in classroom instruction. In 1837, the Ohio government established the Ohio Institution for the Education of the Blind. This institution was the predecessor of the Ohio State School for the Blind. It was the first public school for the blind in the United States. It was the first in the nation to be created and maintained entirely by the State government. The school opened its doors in 1839, and it was located in downtown Columbus, Ohio. Any blind children residing in Ohio could attend the institution. Eleven students enrolled at the Ohio Institution for the Education of the Blind this first year. The school initially had a maximum capacity of sixty students, but upon moving to a new building in 1874, more than three hundred students could attend at one time. Between 1839 and 1901, 2,058 students enrolled at the Ohio Institution for the Education of the Blind, with 339 attending in 1901 alone. In the early 1900s, the Ohio Institution for the Education of the Blind became known as the Ohio State School for the Blind, and the Ohio Department of Education assumed control of the school. In 1953, the school moved ten miles north of its original location to its present home. In 2005, 126 students enrolled in the Ohio State School for the Blind. Students as young as three and as old as twenty-one years of age attended the school. Students could receive their entire education (kindergarten through high school) at the institution. In addition, the Ohio State School for the Blind offered vocational training for its students. View on Ohio Memory.
Image ID: SA1039AV_B11F02_016_001
Subjects: United States. Work Projects Administration; Blind--Education--Ohio; Ohio State School for the Blind; Bolts and nuts
Places: Columbus (Ohio); Franklin County (Ohio)
 

Description: Photograph of a guillotine from a collection of models for the Ohio State School for the Blind. The guillotine is an instrument used to carry out executions by decapitation. The most historic use was during the "Reign of Terror" during the French Revolution. This model guillotine is a replica on which Charlotte Corday was executed for the assassination of Jean-Paul Marat. Model dimensions: length 12", width 12.5", height 37". Photograph is 5" x 7". Photographs and descriptions of models were included in the book "Models for the Blind," compiled by workers of the Ohio Writers' Program. The book was meant as a guide, to be used in the building and study of models, and as documentation of the achievements at the Ohio State School for the Blind. The models were a result of research, design and construction by employees of the Works Projects Administration. Models were made of durable materials to withstand regular usage. The average cost of labor for larger models was $45. A special room was built to store the models where teachers could borrow them to be used in classroom instruction. In 1837, the Ohio government established the Ohio Institution for the Education of the Blind. This institution was the predecessor of the Ohio State School for the Blind. It was the first public school for the blind in the United States. It was the first in the nation to be created and maintained entirely by the State government. The school opened its doors in 1839, and it was located in downtown Columbus, Ohio. Any blind children residing in Ohio could attend the institution. Eleven students enrolled at the Ohio Institution for the Education of the Blind this first year. The school initially had a maximum capacity of sixty students, but upon moving to a new building in 1874, more than three hundred students could attend at one time. Between 1839 and 1901, 2,058 students enrolled at the Ohio Institution for the Education of the Blind, with 339 attending in 1901 alone. In the early 1900s, the Ohio Institution for the Education of the Blind became known as the Ohio State School for the Blind, and the Ohio Department of Education assumed control of the school. In 1953, the school moved ten miles north of its original location to its present home. In 2005, 126 students enrolled in the Ohio State School for the Blind. Students as young as three and as old as twenty-one years of age attended the school. Students could receive their entire education (kindergarten through high school) at the institution. In addition, the Ohio State School for the Blind offered vocational training for its students. View on Ohio Memory.
Image ID: SA1039AV_B11F02_059_001
Subjects: United States. Work Projects Administration; Blind--Education--Ohio; Ohio State School for the Blind; Guillotine
Places: Columbus (Ohio); Franklin County (Ohio)
 

Description: 3" x 4" photograph of a plow from a collection of models for the Ohio State School for the Blind. The plow is one of man's most important tools, used to break the ground for planting. In earliest form, the plow was little more than a sharp stick. A major advance in plow design was the moldboard plow, a general purpose plow, also known as a walking plow. As shown in the model, the largest part of its blade is called the moldboard, to which is attached the plow's actual point, the share. The share bites into the ground while the rear moldboard, the larger part of the plow blade, turns the earth aside. The moldboard plow reduced the amount of time needed to prepare a field, in effect, it allowed a farmer to work a larger area of land. The model is length 11.5", width 3.5", height 4". Photographs and descriptions of models were included in the book "Models for the Blind," compiled by workers of the Ohio Writers' Program. The book was meant as a guide, to be used in the building and study of models, and as documentation of the achievements at the Ohio State School for the Blind. The models were a result of research, design and construction by employees of the Works Projects Administration. Models were made of durable materials to withstand regular usage. The average cost of labor for larger models was $45. A special room was built to store the models where teachers could borrow them to be used in classroom instruction. In 1837, the Ohio government established the Ohio Institution for the Education of the Blind. This institution was the predecessor of the Ohio State School for the Blind. It was the first public school for the blind in the United States. It was the first in the nation to be created and maintained entirely by the State government. The school opened its doors in 1839, and it was located in downtown Columbus, Ohio. Any blind children residing in Ohio could attend the institution. Eleven students enrolled at the Ohio Institution for the Education of the Blind this first year. The school initially had a maximum capacity of sixty students, but upon moving to a new building in 1874, more than three hundred students could attend at one time. Between 1839 and 1901, 2,058 students enrolled at the Ohio Institution for the Education of the Blind, with 339 attending in 1901 alone. In the early 1900s, the Ohio Institution for the Education of the Blind became known as the Ohio State School for the Blind, and the Ohio Department of Education assumed control of the school. In 1953, the school moved ten miles north of its original location to its present home. In 2005, 126 students enrolled in the Ohio State School for the Blind. Students as young as three and as old as twenty-one years of age attended the school. Students could receive their entire education (kindergarten through high school) at the institution. In addition, the Ohio State School for the Blind offered vocational training for its students. View on Ohio Memory.
Image ID: SA1039AV_B11F02_032_001
Subjects: United States. Work Projects Administration; Blind--Education--Ohio; Ohio State School for the Blind; Plows
Places: Columbus (Ohio); Franklin County (Ohio)
 

Description: 6" x 7.5" photograph of an arithmetic board from a collection of models for the Ohio State School for the Blind. The arithmetic board, a solid wood frame, had indented pockets, into which fit the 24 hearts used to teach arithmetic problems. The heart figures were made of compressed wood and painted in a primary color in contrast with the board. The layout of four different lines of figures allowed instruction in multiplication, addition, subtraction or fractions. Other arithmetic boards had figures of crescents, diamonds, circles, squares and stars. The process of using arithmetic boards was similar to the use of paper and pencil, but units were more easily understood than their numerical symbol. The model dimensions: width 14", height 9.5". Photographs and descriptions of models were included in the book "Models for the Blind," compiled by workers of the Ohio Writers' Program. The book was meant as a guide, to be used in the building and study of models, and as documentation of the achievements at the Ohio State School for the Blind. The models were a result of research, design and construction by employees of the Works Projects Administration. Models were made of durable materials to withstand regular usage. The average cost of labor for larger models was $45. A special room was built to store the models where teachers could borrow them to be used in classroom instruction. In 1837, the Ohio government established the Ohio Institution for the Education of the Blind. This institution was the predecessor of the Ohio State School for the Blind. It was the first public school for the blind in the United States. It was the first in the nation to be created and maintained entirely by the State government. The school opened its doors in 1839, and it was located in downtown Columbus, Ohio. Any blind children residing in Ohio could attend the institution. Eleven students enrolled at the Ohio Institution for the Education of the Blind this first year. The school initially had a maximum capacity of sixty students, but upon moving to a new building in 1874, more than three hundred students could attend at one time. Between 1839 and 1901, 2,058 students enrolled at the Ohio Institution for the Education of the Blind, with 339 attending in 1901 alone. In the early 1900s, the Ohio Institution for the Education of the Blind became known as the Ohio State School for the Blind, and the Ohio Department of Education assumed control of the school. In 1953, the school moved ten miles north of its original location to its present home. In 2005, 126 students enrolled in the Ohio State School for the Blind. Students as young as three and as old as twenty-one years of age attended the school. Students could receive their entire education (kindergarten through high school) at the institution. In addition, the Ohio State School for the Blind offered vocational training for its students. View on Ohio Memory.
Image ID: SA1039AV_B11F02_060_001
Subjects: United States. Work Projects Administration; Blind--Education--Ohio; Ohio State School for the Blind; Arithmetic Study and teaching
Places: Columbus (Ohio); Franklin County (Ohio)
 

Description: 3" x 4" photograph of a braille clock. In the 1820's Louis Braille, in his home country of France, developed code using raised dots to represent letters and numbers. The touch system code is used by people who are blind to read and write. This braille clock is from a collection of models for the Ohio State School for the Blind. The model clock has braille characters on its face. As a demonstration clock it has no apparatus inside the clock case, but the hands can be moved with a knob located in the back of the box. The model is length 12", width 12", height 6.5". Photographs and descriptions of models were included in the book "Models for the Blind," compiled by workers of the Ohio Writers' Program. The book was meant as a guide, to be used in the building and study of models, and as documentation of the achievements at the Ohio State School for the Blind. The models were a result of research, design and construction by employees of the Works Projects Administration. Models were made of durable materials to withstand regular usage. The average cost of labor for larger models was $45. A special room was built to store the models where teachers could borrow them to be used in classroom instruction. In 1837, the Ohio government established the Ohio Institution for the Education of the Blind. This institution was the predecessor of the Ohio State School for the Blind. It was the first public school for the blind in the United States. It was the first in the nation to be created and maintained entirely by the State government. The school opened its doors in 1839, and it was located in downtown Columbus, Ohio. Any blind children residing in Ohio could attend the institution. Eleven students enrolled at the Ohio Institution for the Education of the Blind this first year. The school initially had a maximum capacity of sixty students, but upon moving to a new building in 1874, more than three hundred students could attend at one time. Between 1839 and 1901, 2,058 students enrolled at the Ohio Institution for the Education of the Blind, with 339 attending in 1901 alone. In the early 1900s, the Ohio Institution for the Education of the Blind became known as the Ohio State School for the Blind, and the Ohio Department of Education assumed control of the school. In 1953, the school moved ten miles north of its original location to its present home. In 2005, 126 students enrolled in the Ohio State School for the Blind. Students as young as three and as old as twenty-one years of age attended the school. Students could receive their entire education (kindergarten through high school) at the institution. In addition, the Ohio State School for the Blind offered vocational training for its students. View on Ohio Memory.
Image ID: SA1039AV_B11F02_033_001
Subjects: United States. Work Projects Administration; Blind--Education--Ohio; Ohio State School for the Blind; Clocks and watches; Braille
Places: Columbus (Ohio); Franklin County (Ohio)